Forum Scope


Match



Forum Options



Min search length: 3 characters / Max search length: 84 characters
Forum Login
Lost password?
sp_TopicIcon
New Muskie Fisherman Need Tips
Avatar
62 Posts
(Offline)
1
September 9, 2013 - 8:08 pm
ToolsPrintQuote

So this past summer I was out fishing with a buddy and saw a guy catch a muskie, so I made it a goal to catch a muskie my the end of the year. So i bought a brand new setup for muskie fishing and a few lures. I've fished Murray lake in lowell 3 times with no luck. I have 4 bull dawg baits ranging from 8in-12in in colors from cisco, white, and natural sucker, I also have 2 bucktails that are 6 to 8in that are blue/silver and rainbow/silver. If you have some tips or some lure recommendations that would be great! Thanks

Avatar
590 Posts
(Offline)
2
September 9, 2013 - 8:33 pm
ToolsPrintQuote

Well, let's start with your new set up. Throwing mag dawgs, sounds like you've got something to handle big fish. What line and leaders? And most importantly, do you have the necessary release tools?

Avatar
62 Posts
(Offline)
3
September 9, 2013 - 8:59 pm
ToolsPrintQuote

"ricky sox wrangler" said:
Well, let's start with your new set up. Throwing mag dawgs, sounds like you've got something to handle big fish. What line and leaders? And most importantly, do you have the necessary release tools?

Reel spooled up with 65lb Power Pro and a 100lb leader, and I do have the tools for a safe catch and release.

Avatar
2515 Posts
(Offline)
4
September 9, 2013 - 10:44 pm
ToolsPrintQuote

Just keep at it. Three times out without catching one isn't that long actually; that's just muskie fishing. What kind of rod and reel are you using? I would suggest upgrading to 80-100lb superline and then at least 124lb wire or 150lb fluoro. For dawgs and other plastics/jerkbaits I would use wire leaders, and for bucktails/topwater I would use fluoro leaders. Becoming an official member of this site really helps as you get access to fishing reports, a members section, and many other perks.

Avatar
713 Posts
(Offline)
5
September 10, 2013 - 7:07 am
ToolsPrintQuote

It sounds like you have the right baits to start. Like Jason said, three trips on an inland lake without a musky is not actually that bad. I would definitely look at a stronger leader. I personally do not care for Fluorocarbon or Mono but it will work if you go heavy enough, at least 135lb, although 150 is better. Other than that just keep at it, it will happen eventually.

Avatar
139 Posts
(Offline)
6
September 10, 2013 - 11:58 am
ToolsPrintQuote

Hey man keep at it, I've only caught 3 muskies this year and I have put in a lot of time and I have went through every year available in this website on reports in every lake that I have attempted. Most important thing I can say is… Put in the time and research on Muskie fishing from every available resource you can get your hands on. Also step out of your shoes and compare what you do vs the members on this site. One member made a statement about keeping a log book… I do this on my phone calendar and post every trip that I go out on… Water temp, clarity, time of year… Time of day…. The more the better that way when you hit paydirt and land a fish you know that it wasn't just luck, but that the all the conditions came together and you connected… I can tell you the date… Time…. Bait…. And area of the first Muskie that followed my bait. They are hard enough to catch, let alone without a game plan… Don't give up.. Like I said… I have caught 3 only this year, but nothing tops a Muskie strike. Let me know if you ever are on thornapple I'm by far one of the worst Muskie fisherman on this site but I am confident when I fish that lake mainly from the research I've put in on this website and from asking questions. There is no stupid question when it comes to Muskie fishing. It is unlike any other fishing I've done but nothing compares to putting in crazy time and being rewarded and nothing that other fisherman dream of a Muskie in their lines and this club will give you the knowledge to suceed… Keep asking questions and stick to your gameplan!

Avatar
62 Posts
(Offline)
7
September 11, 2013 - 8:52 pm
ToolsPrintQuote

"jasonvkop" said:
What kind of rod and reel are you using?

I currently have an Abu Garcia C4 5600 reel but I think I'm gonna upgrade to a 6600 C4 or C3, and its on a cabelas musky rod that's 7'6'' H

Avatar
1656 Posts
(Offline)
8
September 12, 2013 - 9:36 pm
ToolsPrintQuote

Might need a longer/stronger rod eventually.. minimum 8 ft rod or 9 ft to take the stress out of throwing big baits. Especially if you want to consistently catch fish out of murray

Avatar
62 Posts
(Offline)
9
September 12, 2013 - 10:14 pm
ToolsPrintQuote

"swanezy" said:
Might need a longer/stronger rod eventually.. minimum 8 ft rod or 9 ft to take the stress out of throwing big baits. Especially if you want to consistently catch fish out of murray

That's what I was think the other day when I was out there fishing, it was fine throwing the reg bull dawgs and not too bad with the mag bull dawgs, but when I tried a mag double dog that was 10oz that was just too much.

Avatar
157 Posts
(Offline)
10
September 14, 2013 - 9:06 am
ToolsPrintQuote

I know how you feel, has been a long tough year for me too. Finally had a follow last weekend but didn't hook up. Not sure if it did not like my lure or figure 8. Or maybe was scared off by my ride-along wife squealing and peeing her pants.

Avatar
62 Posts
(Offline)
11
September 27, 2013 - 8:41 am
ToolsPrintQuote

Looking to buy a new rod for bull dawgs anyone have any recommendations?

Avatar
1484 Posts
(Offline)
12
September 27, 2013 - 9:33 am
ToolsPrintQuote

My favorite is the st croix big dawg. Its great for pretty much everything, a little heavy for small bucktails and glides and jerkbaits like suicks, but will do anything especially dawgs. My second choice on a budget would probably be the Okuma telescoping EVx rods, in either heavy of X-heavy, for pounders I would go with X-heavy for sure. I have fixed an aweful lot of the other brands.

Avatar
2515 Posts
(Offline)
13
September 27, 2013 - 10:27 am
ToolsPrintQuote

"MuskyHunter1" said:
Looking to buy a new rod for bull dawgs anyone have any recommendations?

What size dawgs are you planning on throwing? I love the 'Big Dawg' rod from St. Croix for mag-dawgs and pounders, but it is a little pricey. The 9'3" Okuma EVX rod is a great rod for mag-dawgs and can be used for pounders.

Avatar
713 Posts
(Offline)
14
September 27, 2013 - 10:56 am
ToolsPrintQuote

"jasonvkop" said:
[quote="MuskyHunter1"]Looking to buy a new rod for bull dawgs anyone have any recommendations?

. The 9'3" Okuma EVX rod is a great rod for mag-dawgs and can be used for pounders.

I have two of these. One of them is a H and it is great for small (regular) dawgs and the mag dawgs, but that's about as heavy as you would want to go with it. I also have a XH and it is great for Mag dawgs and good for pounders, but is a touch on the stiff side for the small dawgs although it will throw them fine. IF you have no desire to throw pounders than I would go with the H, if you want to throw pounders go with a XH. If you have the cash though I'd go with the Big Dawg, it's a sweet rod.

Avatar
76 Posts
(Offline)
15
September 27, 2013 - 8:16 pm
ToolsPrintQuote

Check out the muskie innovations rods, made for rubber. Monster mag is good for mags and handles pounders well……Their Mark Lejewski 4x is the ultimate pounder rod for me. Comparable or slightly less maybe than St croix. That said…..St. Croix is my favorite brand and you can't ever lose with one of those!

Avatar
62 Posts
(Offline)
16
September 29, 2013 - 9:40 pm
ToolsPrintQuote

I found a good deal on a Musky Innovations Bull Dawg Rod that's 8'6" XH with a lure rating from 4-16oz. That should handle mags no problem and pounders? I have a second rod thats rated from 1-4 that I throw regs, bucktails and crankbaits with.

Avatar
1656 Posts
(Offline)
17
October 2, 2013 - 2:35 pm
ToolsPrintQuote

It will throw Magnums fine, and you CAN throw pounders with them, but expect to be exhausted if u fish pounders for an extended period of time with it.

Avatar
68 Posts
(Offline)
18
October 2, 2013 - 9:27 pm
ToolsPrintQuote

Another good rod for pounders is the 8'6" extra-heavy from Custom X. You can toss some serious weight with this one.

Avatar
62 Posts
(Offline)
19
October 7, 2013 - 10:04 am
ToolsPrintQuote

Does anyone have any tips on fishing murray lake? I've been fishing there a lot this past summer and a couple times this fall and haven't had any luck. Just looking for some tips, techniques, or lures to use there. Thanks

Avatar
7492 Posts
(Offline)
20
October 7, 2013 - 10:23 am
ToolsPrintQuote

"MuskyHunter1" said:
Does anyone have any tips on fishing murray lake? I've been fishing there a lot this past summer and a couple times this fall and haven't had any luck. Just looking for some tips, techniques, or lures to use there. Thanks

The fish are still acting like summer fish out there still with the warm weather and warm water temps. They aren't moving shallow very often and are staying suspended over open water or in the deep weeds. Suspending crankbaits over open water and bulldawgs over/in the deep weeds has been moving some big fish in these areas. This should all change this week as the lake will start going through turnover and we'll see the fish acting more like fall fish with daily movements to shallower water.

Forum Timezone: America/Detroit
All RSSShow Stats
Top Posters:
Steve S: 2712
Forum Stats:
Groups: 1
Forums: 111
Topics: 9245
Posts: 57511

 

Member Stats:
Guest Posters: 0
Members: 16575
Moderators: 0
Admins: 2

Most Users Ever Online
52
Currently Online
Guest(s)
46
Currently Browsing this Page

1 Guest(s)